High temperatures of over 50°C and large blocks of waste concrete were the challenges at two job sites in Saudi Arabia. It was necessary to make sure that the machines did not overheat and that the dust generated on the site did not affect machine performance. The RM 70GO! crushed the surplus and hardened concrete on both sites. The mobile oversize material separator OS GO! reliably separated the oversize material from the 0-20 mm end product. The oversize material was redirected to the crusher again using the refeeding belt. The high-value aggregate was screened into two fractions by the TS3600 mobile high-performance screen. The cost savings were considerable: “waste” material was put to good use in a new and high-quality process.

Our crushers in action

RM 70GO! 2.0

The RM 70GO! 2.0 is the perfect crusher for contractors who want to start with crushing and recycling. Thanks to the simple design and ease of operation, it doesn’t require aggregate/mining skills to operate the machine. Also ideal for owner-operators!

Get your own RUBBLE MASTER! Contact us now!

sales@rubblemaster.com

+43 732 73 71 17 – 0

More Job Stories

Natural rock

Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.

Abrasive rock

Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.

Crushing gravel with 90% quartz content

Processing 24,000 tons of gravel with a quartz content of around 90 percent to produce 0-32 mm value grain
– that was the right challenge for the RM 100GO!. The mobile power pack with its wear-resistant hammers rose to this challenge in the Vienna basin extremely economically. Excavator and loader drivers are impressed.

Endurance in riverbed gravel

Building roads to connect to eastern Mexico was difficult because of the problematic terrain. It was necessary to prepare materials on site because of the remote locations of the construction sites. The RM70 GO! is ideal for challenges like this. Its manoeuvrability make it a perfect machine.

High demand for crushed sand and grit

The Swiss company Mühlebach AG has been successfully processing gravel for 40 years. As pioneers in this business field, they demand machines that are state of the art. They have now added an RM V550GO! to their fleet of machines in order to meet the demand for crushed sand and grit.

Riverbed gravel

River gravel is processed on a regular basis at this gravel pit. An excavator is used to feed in the round material which always has to be screened into three fractions. The TS3600 produces several defined material sizes from round material and separates sand, gravel and grit. Output was up to 200 t/h.