Countrie Cameroon
Machines RM 120GO!, RM MSC8500M
Material Granit
Feed material 0-600 mm
Final aggregate 0-31,5mm, 0-5, 5-15, 15-25 mm
Final material application Substrate material

To the south of Yaounde, a 48 km long highway is being built in just eight months. This requires large quantities of granite as substrate material. Due to the high time pressure, BOFAS Sarl was looking for a possibility to process material quickly to produce different final grain sizes (0-31.5 mm, 0-5 mm, 5-15 mm, 15-25 mm) and deliver it directly to the road construction site while keeping transport distances as short as possible.

Purchasing the RM 120GO! and RM MSC8500M combination as an entry into mobile reprocessing was the perfect solution. The RM crusher unit processes granite directly on-site to produce a high-quality, cuboid final aggregate (0-31.5 mm) in a single pass so that it can immediately be used as a substrate material. The RM screen grades the other fractions for immediate use on site.

The local service, the rapid availability of spare and wear parts and the extensive operator training provided by the local sales partner ensure that the project remains on schedule. Following the completion of the project, the RM combination is immediately transported to the next project in the north of Cameroon.

Our crushers in action

RM MSC Nachsiebanlagen

In nur einem Arbeitsgang bis zu fünf Fraktionen produzieren – das schaffen die raupenmobilen Siebe der RM MSC-Serie und geben Ihnen den notwendigen Vorteil am Markt. Je nach Bedarf können Sie eine 2-Deck oder 3-Deck Maschine im Steinbruch, für Kies und Sand oder Bauschutt einsetzen.

RM 120X

Der RM 120X setzt als erster Brecher in der NEXT Philosophie neue Standards in der mobilen Aufbereitung. Bewährt kompakt und leistungsstark punktet er mit gesteigerter Sicherheit und maximaler Flexibilität. Die Interaktion zwischen Maschinenbetreiber und Brecher ermöglich maximale Effizienz be

Get your own RUBBLE MASTER! Contact us now!

[email protected]

+43 732 73 71 17 – 0

Weitere Einsatzberichte

Natural rock

Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.

Abrasive rock

Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.

Crushing gravel with 90% quartz content

Processing 24,000 tons of gravel with a quartz content of around 90 percent to produce 0-32 mm value grain
– that was the right challenge for the RM 100GO!. The mobile power pack with its wear-resistant hammers rose to this challenge in the Vienna basin extremely economically. Excavator and loader drivers are impressed.

Endurance in riverbed gravel

Building roads to connect to eastern Mexico was difficult because of the problematic terrain. It was necessary to prepare materials on site because of the remote locations of the construction sites. The RM 70GO! is ideal for challenges like this. Its manoeuvrability make it a perfect machine.

High demand for crushed sand and grit

The Swiss company Mühlebach AG has been successfully processing gravel for 40 years. As pioneers in this business field, they demand machines that are state of the art. They have now added an RM V550GO! to their fleet of machines in order to meet the demand for crushed sand and grit.

Impressive RM V550GO! performance in Argentina

At the beginning of the year the RM V550GO! made light work of transforming 0-200 mm river rock into fine 0-19 mm value grain. The awesome capacity and low diesel consumption were key in the Argentine company’s decision to purchase the RM V550GO!.