An Austrian civil engineering company was contracted to process 20,000 t of slate rock for the mountain reservoir of a snow-making facility. The company decided in favour of the particularly economical combination of an RM 80GO! and RM TS3600 to carry out the work.
The cubic aggregate was conveyed from the discharge belt of the crusher directly into the screen box of the TS3600. This is where it was classified in three final sizes: the fine 0-8 mm material was used as an impermeable layer whereas the 08-32 mm medium material and the 32-70 mm coarse material was used as fill material. This solution produced 1,200 t of finished aggregate on a daily basis.
Our crushers in action
High performance and profitable – these are the characteristics which best describe the RM 90GO!. Packed with versatility it transforms all mineral materials into high-quality cubic aggregate at up to 200 t/h. Thanks to its mobility it is at home in city centres as well as in the mountains.
Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.
Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.
Crushing gravel with 90% quartz content
Processing 24,000 tons of gravel with a quartz content of around 90 percent to produce 0-32 mm value grain
– that was the right challenge for the RM 100GO!. The mobile power pack with its wear-resistant hammers rose to this challenge in the Vienna basin extremely economically. Excavator and loader drivers are impressed.
Endurance in riverbed gravel
Building roads to connect to eastern Mexico was difficult because of the problematic terrain. It was necessary to prepare materials on site because of the remote locations of the construction sites. The RM 70GO! is ideal for challenges like this. Its manoeuvrability make it a perfect machine.
High demand for crushed sand and grit
The Swiss company Mühlebach AG has been successfully processing gravel for 40 years. As pioneers in this business field, they demand machines that are state of the art. They have now added an RM V550GO! to their fleet of machines in order to meet the demand for crushed sand and grit.
Impressive RM V550GO! performance in Argentina
At the beginning of the year the RM V550GO! made light work of transforming 0-200 mm river rock into fine 0-19 mm value grain. The awesome capacity and low diesel consumption were key in the Argentine company’s decision to purchase the RM V550GO!.