| Country | Philippines |
| Machines | RM 100GO!, RM MS105GO!, RM RFB7550GO! |
| Material | black shale, limestone and volcanic rocks |
| Feed material | 0-500 mm |
| Final aggregate | 0-40 mm black shale, 0-80 mm limestone, 0-40 mm volcanic rocks |
| Average throughput | 160 t/h |
| Application | aggregate in cement production |
One of the oldest and biggest cement producers in the Philippines, processes limestone, black shale and volcanic rocks for cement production at seven strategically located locations around the country. The company’s site North of Manila recently stopped using their stationary plant and since summer 2019 has been renting the RM 100GO! mobile crusher from the RM dealership MULTICO PRIME POWER, INC. on a long-term basis. The crusher is in operation eight hours a day at least twenty days a month, which means that it has already notched up 450 machine hours. In the near future, the RUBBLE MASTER equipment will also be used at the customer’s other cement plants. A major deciding factor for choosing RM machinery is that it complies with the local quarry specifications and, due to its compactness, is able to deliver outstanding results even in locations where space is limited. The strict safety regulations in the Philippines also underlined the customer’s decision. The very highest safety standards – such as those laid down in the Austrian MSV 2010 machinery directive – are met by the entire RM fleet.
Shared objectives
This valued customer and RUBBLE MASTER place great importance on minimising environmental impact. The manufacturing process and design of RM machinery takes the reduction of emissions and noise levels into consideration, for instance. Low diesel consumption and a highly efficient driveline are also possible thanks to the diesel direct drive system. RUBBLE MASTER is therefore the ideal way to support the customer in striving to produce cement that is of the highest quality at the same time as being greener.
Our crushers in action
RM 100GO!
The RM 100GO! is the star among the mobile crushers – a mobile power pack for every application. It is ready for action within minutes and can handle a wide variety of materials extremely quickly. Weighing in at only 29 t when empty, it crushes up to 250 tonnes of material per hour.
Soft stone
Why are mobile crushers and mobile screens from RM so in demand for processing soft stone such as limestone and gypsum? Because thanks to their compact dimensions and manoeuvrability, they are perfect for working in even the most remote (alpine) locations. High output comes as a matter of course.
Natural rock
Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.
Abrasive rock
Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.
Crushing gravel with 90% quartz content
Processing 24,000 tons of gravel with a quartz content of around 90 percent to produce 0-32 mm value grain
– that was the right challenge for the RM 100GO!. The mobile power pack with its wear-resistant hammers rose to this challenge in the Vienna basin extremely economically. Excavator and loader drivers are impressed.
Endurance in riverbed gravel
Building roads to connect to eastern Mexico was difficult because of the problematic terrain. It was necessary to prepare materials on site because of the remote locations of the construction sites. The RM 70GO! is ideal for challenges like this. Its manoeuvrability make it a perfect machine.
High demand for crushed sand and grit
The Swiss company Mühlebach AG has been successfully processing gravel for 40 years. As pioneers in this business field, they demand machines that are state of the art. They have now added an RM V550GO! to their fleet of machines in order to meet the demand for crushed sand and grit.
Impressive RM V550GO! performance in Argentina
At the beginning of the year the RM V550GO! made light work of transforming 0-200 mm river rock into fine 0-19 mm value grain. The awesome capacity and low diesel consumption were key in the Argentine company’s decision to purchase the RM V550GO!.