River gravel is processed on a regular basis at this gravel pit. An excavator is used to feed in the round material which always has to be screened into three fractions.
The coarse material (32 mm and over) is crushed and used as subgrade. The 16/32 mm medium material is either sold or used as drainage material at the company’s own tip. The remaining 0-16 mm fine material is screened again, down to 0-4 mm, 4-8 mm and 8-16 mm. The TS3600 produces several defined material sizes from round material and separates sand, gravel and grit. Throughput is up to 200 t/h, depending on the material.

Our crushers in action

RM MSC post screens

Produce up to five fractions in a single pass – that is what the RM tracked MSC series screens can do to give you a decisive advantage in the market. Depending on requirements, you can use 2-deck or 3-deck machines in quarries, for gravel and sand or for rubble.

Get your own RUBBLE MASTER! Contact us now!

[email protected]

+43 732 73 71 17 – 0

Weitere Einsatzberichte

Natural rock

Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.

Abrasive rock

Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.

Crushing gravel with 90% quartz content

Processing 24,000 tons of gravel with a quartz content of around 90 percent to produce 0-32 mm value grain
– that was the right challenge for the RM 100GO!. The mobile power pack with its wear-resistant hammers rose to this challenge in the Vienna basin extremely economically. Excavator and loader drivers are impressed.

Endurance in riverbed gravel

Building roads to connect to eastern Mexico was difficult because of the problematic terrain. It was necessary to prepare materials on site because of the remote locations of the construction sites. The RM 70GO! is ideal for challenges like this. Its manoeuvrability make it a perfect machine.

High demand for crushed sand and grit

The Swiss company Mühlebach AG has been successfully processing gravel for 40 years. As pioneers in this business field, they demand machines that are state of the art. They have now added an RM V550GO! to their fleet of machines in order to meet the demand for crushed sand and grit.

Impressive RM V550GO! performance in Argentina

At the beginning of the year the RM V550GO! made light work of transforming 0-200 mm river rock into fine 0-19 mm value grain. The awesome capacity and low diesel consumption were key in the Argentine company’s decision to purchase the RM V550GO!.