The new RM V550GO! from RUBBLE MASTER, the global market leader in Compact Crushing, brings together all the benefits of a jaw crusher, impact crusher and a mill in a single machine and was developed especially for the requirements of the natural stone industry. The new, mobile rotor crusher is currently demonstrating its reliability and strong performance at Europe’s largest infrastructure project.

The RM V550GO! is in action on the site of the new high-speed rail section between Stuttgart and Ulm where it is crushing limestone from blasting processes for the construction of the 4,487 metre long Steinbühl tunnel. The 3-stage VORTEX rotor crusher is the heart of the new machine. Thanks to the superior crushing technology, valuable aggregate can be produced with a single machine in a 3-step process. The RM V550GO! is already performing very well in its first major contract as part of the Stuttgart-Ulm rail project where it can take full advantage of all its strengths. The aggregate produced is used for the logistics directly on site such as in securing the concrete works and in building roads. A metal detector prevents the inclusion of any undesired metals.

Absolute reliability, compact mobility and outstanding RM service are what make all the machines from the company RUBBLE MASTER stand out. With the RM V550GO! the global market leader for crushers and screens in the compact class has launched an innovation which sets new standards in the market. The RM V550GO! unites the VORTEX crushing principle and all the proven benefits of the RM GO! principle, thus achieving a high degree of crushing efficiency which is second to none while maintaining maximum flexibility. RM modules can be added to the system at any time. With the mounted screen RM MS100GO! and the compact screen RM CS4800, for example, you can create a fully mobile, compact and high-performance screening and splitting system with convincing quality.

Our crushers in action

RM V550GO!

The RM V550GO! merges the technology of a cone crusher and vertical shaft impactor. Combined with the benefits of the RM GO! principle, it is a compact mobile sand and grit mill. The crushing technology produces an unsurpassed reduction ratio, even with hard rock.

Get your own RUBBLE MASTER! Contact us now!

[email protected]

+43 732 73 71 17 – 0

More Job Stories

Natural rock

Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.

Abrasive rock

Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.

Crushing gravel with 90% quartz content

Processing 24,000 tons of gravel with a quartz content of around 90 percent to produce 0-32 mm value grain
– that was the right challenge for the RM 100GO!. The mobile power pack with its wear-resistant hammers rose to this challenge in the Vienna basin extremely economically. Excavator and loader drivers are impressed.

Endurance in riverbed gravel

Building roads to connect to eastern Mexico was difficult because of the problematic terrain. It was necessary to prepare materials on site because of the remote locations of the construction sites. The RM70 GO! is ideal for challenges like this. Its manoeuvrability make it a perfect machine.

High demand for crushed sand and grit

The Swiss company Mühlebach AG has been successfully processing gravel for 40 years. As pioneers in this business field, they demand machines that are state of the art. They have now added an RM V550GO! to their fleet of machines in order to meet the demand for crushed sand and grit.

Riverbed gravel

River gravel is processed on a regular basis at this gravel pit. An excavator is used to feed in the round material which always has to be screened into three fractions. The TS3600 produces several defined material sizes from round material and separates sand, gravel and grit. Output was up to 200 t/h.