High temperatures of over 50°C and large blocks of waste concrete were the challenges at two job sites in Saudi Arabia. It was necessary to make sure that the machines did not overheat and that the dust generated on the site did not affect machine performance. The RM 70GO! crushed the surplus and hardened concrete on both sites. The mobile oversize material separator OS GO! reliably separated the oversize material from the 0-20 mm end product. The oversize material was redirected to the crusher again using the refeeding belt. The high-value aggregate was screened into two fractions by the TS3600 mobile high-performance screen. The cost savings were considerable: “waste” material was put to good use in a new and high-quality process.

Our crushers in action

RM 70GO! 2.0

The RM 70GO! 2.0 conjures up to 150 t/h cubic high-quality grain from rubble, asphalt, concrete and natural rock. As a mobile crusher, it is the ideal machine for companies which have discovered recycling as a new and profitable line of business. Easy, compact and powerful.

Contact us for more information

[email protected]

+43 732 73 71 17 – 0

Natural rock

Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.

Abrasive rock

Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.

Schrefler relies on RM hybrid crusher

Demolition work and mobile recycling have been part of Manfred Schrefler’s range of services since 2016; previously he was known primarily for transport and earthwork. In terms of machinery, the Upper Austrian relies on top quality and always has the very latest technology.

Basalt preparation

Crushed basalt is used for a variety of purposes. Most often, it is crushed to be used as an aggregate in construction projects.

Increase in orders with cuboid final aggregate

In Mexico the RM 100GO! replaces a jaw and cone crusher combination. Basalt with a diameter of up to 500 mm is crushed into different sizes of cuboid final aggregate, which is then reused for asphalt production. Final aggregate grades between 0-19 and 0 25 mm are processed to a high standard without any problems.

RM 70GO! 2.0 crushes hard river basalt

The first mobile RM crusher in Gorontalo, Indonesia, has been in operation since spring 2017. The new RM 70GO! 2.0 replaces several machines at once: instead of using the jaw crusher combined with a cone crusher, this mobile crusher unit processes extremely hard river basalt in a single pass.